Watch Care

To remove scratches
Apply toothpaste to the surface of the watch face and rub it with a piece of soft cloth, which should remove minor scratches.

Clean the watch strap
If the dirt/stain is only on the surface, just use a soft brush to clean it. You can use a neutral detergent too if necessary. Avoid chemical detergent as it may cause chemical reactions and damage the surface. If the stain is already penetrated into the surface, it might not be possible to clean it.

Care of the watch
The water resistant function can deteriorate with the aging of the water resistant seal or distortion of the seal by exposure to heat, for example having watch in hot tub or sauna . If the seal becomes brittle, change the seal to restore water-resistant capability. If the watch was submerged into sea water, rinse it clean with fresh water and wipe it dry.

Remove water vapor
Water vapor could appear due to a sudden change of temperature. To remove the water vapor:

1) Wrap the watch in a piece of velvet cloth and heat the watch for 30 minutes using a 40W light at a distance of 15 cm (6 in). Do NOT directly heat it with flame!
2) Wear the watch with the watch face on your inner-arm for 2 hours.